01 / 03
VISIO — line overview
02 / 03
Visio QC — line exit
03 / 03
Tilt correction — before and after
‹ Back to Tiles & Ceramics
VISIO
KERAjet's artificial-vision system for automatic adjustment and product control, prepared to install at the line entry and exit in two modules: Visio IC and Visio QC.
2
modules: IC and QC
40 m/min
conveyor speed, up to
700–1800
mm format range
Available Production Configurations
SYSTEM CAPABILITIES
Key Advantages & Engineering Innovations
Engineered for seamless digital integration, high fluidic throughput, and continuous uptime in heavy-duty production environments.
Visio IC — detection and centring
Identifies each piece's relief or texture and calculates its position and angle on the belt, so the machine loads the right design and adjusts the print before printing.
Visio QC — inspection and adjustment
Unattended visual inspection at the exit, with an automatic response to defects, plus vision-based machine adjustment outside production.
Automatic response to defects
Depending on the severity of the defect detected, it triggers a breaker, a separator, stops the belt or sounds the alarm.
Installable on existing machines
An upgrade added to the line without replacing your current equipment.
Relief and texture detector
Identifies each tile's relief or texture against a predefined pattern and tells the machine to load the matching design before printing. No limit to the number of reliefs or textures recognised.
Piece centring
Calculates each piece's displacement and rotation angle relative to the camera centre and adjusts the design being printed. Can't run at the same time as the relief detector, since each function needs a different lighting setup.
Vision-based machine adjustment
Outside production, automatically adjusts print delays, overlaps and tones, head by head, using a dedicated test for each adjustment.
Visual inspection
Detects imperfections on the piece — drops, banding, breakage — and, depending on severity, can trigger a breaker, a separator, stop the belt or sound the alarm.
TECHNICAL SPECIFICATIONS
Engineering Datasheet & Operating Parameters
Factory-verified operational thresholds, printhead architecture, and dimensional tolerances certified for industrial line deployment.
Format
700, 1400 and 1800 mm
Piece length
Up to 3 m, or more depending on line levelling
Conveyor speed
Up to 40 m/min
Piece material
Opaque, non-reflective, rectangular surface
FACTORY LINE INTEGRATION
Ready to Integrate VISIO into your production line?
Our specialized application engineering team provides comprehensive line layout studies, ink consumption simulations, and turnkey installation support across India and international facilities.